DROPPER POST
The Arktos is designed to utilize a “stealth” or internally-routed dropper post. The cable housing is intended
to route from the remote handlebar lever, enter the down tube just behind the head tube, and follow the down
tube and go directly up into the seat tube.
Some tips for installation:
1) It is best to route the housing before you install the bottom bracket as this makes it easier to route the
cable up into the seat tube.
2) Follow the minimum insertion line of the seatpost to ensure proper height of the post.
3) After you attach the cable and are inserting the post into the frame, make sure you pull on the housing
(up near the head tube) so you do not bind the housing down in the frame.
Dropper Post Installation
5
To Next Page
Loading...