Need help?Do you have a question about the Alcohawk AT7000 and is the answer not in the manual?
General| Measurement Range | 0.000 - 0.400% BAC |
|---|---|
| Accuracy | ±0.01% BAC |
| Display | LCD |
| Power Source | 2 x AAA Batteries |
| Blowing Time | 5 seconds |
| Sensor Technology | Semiconductor |
| Warm-up Time | 10 seconds |
| Response Time | 10 seconds |
| Operating Temperature | 50 - 104°F (10 - 40°C) |
| Battery Life | Approximately 300 tests |
| Calibration | Every 6 months |
| Type | Digital Breath Alcohol Tester |
Describes the external physical appearance of the alcohol tester.
Explains the various elements and information shown on the device's screen.
Details the procedure and indicators for turning the alcohol tester on.
Covers manual turn-off, automatic power saving, and low battery shutdown.
Displays the number of days remaining until the next calibration is due.
Allows setting the current date and time on the device.
Enables selection of measurement units and updates alarm points accordingly.
Lets the user adjust the duration for blowing into the tester.
Controls how long test results are visible on the screen.
To Next Page
