Servicing
• Itisrecommendedonceyourstuseyourproducttogetitservicedafter
15 hours of use.
• Fromthereafter,servicetheproductevery2years.
Storage and maintenance after use
• Whenyounishworking,cleantheunitcompletely,makingsurethere
is no grass or dirt wrapped in the cutting tools, and put it back into its
package in order to avoid its hurting you or other people during transport.
• Beawaretonothitorcutthefueltankwhileyouputitontotheground.
• Donotlettheunitfalldowntotheoororitmaydamagethemachine.
• Storetheunitawayfromdirectsunlight.
• Donotstoreinanylonbagasthiscanencouragetheformationofmould.
• Attheendoftheseason,givetheunitanoverallcleaningandathorough
check.
• Donotleavetheunitrestingontheoorforextendedperiodsasitcould
cause the shape of the guard to alter, posing a safety risk. Hang it off the
floor by the top handgrip.
Whenever the machine is not used for a long period of time,
proceed as follows:
• Emptythefueltank(6)completely.
• Protectallmetalenginepartsfromcorrosionbycoatingthemwithoil.
• Removethesparkplug(1),putafewdropsofoilintothecylinderand
then pull the recoil starter (2) 2 to 3 times in order to distribute the
oil evenly.
• Replacethesparkplug(1).
Servicing