ALDI BELAVI 199159_20210429 - Assembly: Crank Handle; Attaching Crank Handle (Part 1); Attaching Crank Handle (Part 2)

Assembly
15
8 Attaching the crank handle (1)
8
7
9
1.
2.
1. Pull the trigger on the umbrella handle
7
to unlock the umbrella handle (see
step 1 in Fig. 8).
2. Slide the umbrella handle up a little to tilt the umbrella
9
and reveal the side
of the umbrella handle (see step 2 in Fig. 8).
9 Attaching the crank handle (2)
9
1
2
3.
1. 2.
7
14
1. Align the hole in the crank handle
14
with the tab in the umbrella handle
7
.
2. Push in to connect the handles together. Make sure the tab of the umbrella
handle fits into the hole in the crank handle (see step 1 and step 2 in Fig. 9).
Assembly is complete.
− To detach the crank handle, use a suitable tool to push the tab of the umbrella
handle in and pull the crank handle out (see step 3 in Fig. 9).