23
Preparatory work
Bringing up the lower thread
− Put the presser foot
26
up.
− Turn the hand wheel towards you with your right hand until the
needle is in the uppermost position.
− Hold the upper thread loosely in your left hand and turn the
hand wheel towards you with your right hand until the needle
has moved down and back up again.
Stop turning the hand wheel as soon as the needle has reached
its highest position.
− Pull the upper thread upwards slightly so that the lower thread
forms a loop.
− Pull a length of about 15 cm of both threads towards the back
under the presser foot
26
.
To Next Page
Loading...
