0151 649 1500 1890 946244
www.einhell.co.uk
24
Electric Impact Shredder – GLEKS 2440Safety
h) Do not allow processed material to accumulate within
the discharge area; this could prevent the machine being
able to discharge correctly and result in material recoiling
through the in-feed opening of the loading tunnel. Risk of
injury by catapulted material from the loading tunnel inlet.
i) Connect the equipment to the power supply only via an RCD
circuit breaker with max. 30mA tripping current.
5. Service
a) Only have your impact shredder repaired by a qualified
professional and only with original spare parts. This will ensure
that the safety of the impact shredder is not compromised.
b) When servicing the cutting tool, remember that it may still be
moving due to the starting mechanism, even if the motor is not
running because of the cover interlock.
c) Pull out the mains plug and carry out the following work:
– Check the machine for signs of damage.
– Check that all the parts are secure and tighten them if
necessary.
– Have any damaged parts replaced or repaired, but use
only spare parts of the same type and equivalent quality.
WARNING!
Danger for children and persons with impaired physical, sensory
or mental capacities (e.g. partially disabled persons, older persons
with reduced physical and mental capacities) or lack of experience
and knowledge.
66926_3430345_11026_ug_inner.indd 24 22/03/2016 3:22 pm
To Next Page
Loading...
