Maintenance
Maintenance
WARNING! Always ensure that the tool is switched o and the baer is removed from tool before
making any adjustments or performing maintenance procedures
WARNING! Use only original manufacturer’s replacement parts, accessories and
aachments. Failure to do so can cause possible injury and poor
performance.
Maintenance and Cleaning
1. Always remove the baery from the tool before doing any maintenance or cleaning work.
2. For safe and proper working, always keep the tool and venlaon slots clean.
3. Regularly check to see if any dust or foreign material has entered the slots near the motor
and around the on/o switch.
4. Use a so brush to remove any accumulated dust.
5. Wear safety glasses to protect your eyes while cleaning.
6. If the body of the tool needs cleaning, wipe it with a so damp cloth.
WARNING! Do not use cleaning agents to clean the plasc parts of the tool. A mild
detergent on a damp cloth is recommended. Water must never come into
contact with the tool.
7. Never use causc agents to clean plasc parts.
8. Lubricate all moving parts at regular intervals.
9. When not in use, the machine should be stored indoors in a dry, locked up place—out of the
reach of children and untrained users.
AFTER SALE SUPPORT
support@sumec-na.com
16
1855 399 9415
MODEL: N1F-GT-250/18-D PRODUCT CODE: 45239 04/2015
Cordless Trimmer · 18V Lithium-ion Battery
To Next Page
Loading...
