24
In this case, the time continues to run normally, from the start time of "00:00".
z First, check whether the location of the base station is suitable, see page 27.
z You can restart the receiving process again manually, see page 23, or
z Wait until the base station automatically switches to receiving again later.
Reception is usually better during the night.
z If reception is not possible at your location, you can set the time and date
manually, see next chapter.
Set time and date manually
1. Keep the MODE/SET. pressed until the year flashes in the display.
2. Using the +/ or -/ /ZONE buttons, set the year.
3. Press the MODE/SET. button to save the setting.
The month flashes in the display.
4. Using the +/ or -/ /ZONE buttons, set the month.
5. Press the MODE/SET. button to save the setting.
The date flashes in the display.
6. Using the +/ or -/ /ZONE buttons, set the date.
UK Funkwetterstation.book Seite 24 Freitag, 13. Juni 2014 1:47 13
To Next Page
Loading...