26
15. Press the MODE/SET. button to end the process.
Start radio reception manually
If the adjacent radio signal symbol is no longer displayed, the radio signals of
the time signal transmitter are no longer being received. The time display
nevertheless continues to run accurately.
In order to start the reception of the time signal manually, keep the -/ /ZONE button
pressed until the radio signal symbol is displayed again and the weather station is
switched to reception.
Please note:
z If the reception was not successful, the reception symbol disappears after several
minutes and the time in the display continues to run normally.
z With successful reception, the radio-controlled alarm clock sets itself to the time of
the time signal transmitter. If you have already carried out manual time and date
settings, these are automatically adjusted.
UK Funkwetterstation.book Seite 26 Freitag, 13. Juni 2014 1:47 13
To Next Page
Loading...