• When mounting it, make sure that the
fastening clips on the shaving foil frame
fit into the corresponding recesses on
the shaver attachment. Gently push the
shaving foil frame down until it audibly
locks into place.
• From time to time, apply a few drops of
acid-free blade oil (e.g. sewing machine
oil) to the shaver blade. Place the shaver
attachment on the hair trimmer and let
it run for a few seconds without using
it. If applicable, use a soft cloth to wipe
excess blade oil off.
1. Take the shaver attachment
18
off.
2. Push the buttons on the side of the shaver attach-
ment and pull the shaving foil frame off. In the pro-
cess, only hold the shaving foil frame by the sides
and do not press down on the shaving foil.
3. Clean the shaver blade with the enclosed cleaning
brush
20
.
4. Clean the shaving foil in the shaving foil frame under
running water and let it dry completely before put-
ting it back on the shaver attachment.
5. Place the shaving foil frame back on the shaver
attachment.
To Next Page
Loading...