17
9. After this minute 5 beeps are emitted while the bottle warmer switches itself
10.
food to ensure an even temperature.
11. First check the temperature of the food with the back of your hand before
feeding your baby, to ensure the food is at a temperature that’s safe for your
baby.
•
water of the bottle warmer. You don’t have to switch the device on again.
The water will still be warm enough. Perhaps next time you could increase
the warm-up time somewhat.
• If the temperature is too high, let the milk or food cool down and next time
set a somewhat shorter warm-up time.
To slowly heat up:
1. Place the bottle warmer on a stable surface, out of reach of children.
2. Place the jar (without lid) or bottle into the bottle warmer.
3. Fill up the space between the bottle warmer and the bottle or jar with tap wa-
ter at room temperature. Fill with water until you reach the same
maximum mark indicated.
4. Insert the plug into a 230Volts wall socket.
5. Press the
button to switch on the bottle warmer.
Amount
of milk:
60ml
90ml
120ml
150ml
180ml
210ml
240ml
270ml
jar:
120gr
200gr
Plastic
2:00
2:03
2:22
2:30
2:35
3:00
3:15
3:20
Glass
1:40
1:50
2:10
2:18
2:22
2:40
3:00
3:05
Food at room
temperature
Plastic
2:16
2:37
3:20
3:46
4:10
4:25
4:40
4:55
Glass
2:05
2:15
3:03
3;25
3:55
4:06
4:25
4:38
Food from
the fridge
2:20
2:30
3:10
4:00
Depending on the amount of milk or food, the initial temperature and the material
of the bottle or jar, you may have to adjust the warm-up time.
The following chart only serves as a reference:
max
To Next Page
Loading...
