Alecto COA3910 User Manual

39
USER MANUAL
AVOID THE FOLLOWING PLACES FOR INSTALLATION:
• Do not install the CO-detector in the turbulent air created by ceiling fans.
• Do not install the CO-detector near vents with fresh air.
• Do not install the CO-detector near doors and windows leading outdoors.
• Do not install the CO-detector near extremely dusty, dirty or greasy spaces such as heating spaces <4m ³ or
pantries. Dust, grease and household chemicals can affect the sensor.
• Install the CO detector at least 0.5 meters away from gas discharge lamps (halogen) because of electronic
interferences that can lead to false alarms.
• Do not install the CO detector in humid and wet spaces, such as the bathroom.
• Do not install the CO detector in a location where the temperature is lower than -10°C or warmer than +45°C.
• Do not install the CO detector in a place where the humidity is higher than 93%RH.
• Never install the CO detector behind curtains or furniture. Carbon monoxide must be able to reach the sensor
to ensure the sensor can properly detect carbon monoxide levels.
• NeverinstalltheCOdetectoratonatableorsimilarsurface.
• Never install the CO detector in spaces where spray cans may be used (hair spray, deodorant)
Not near an
air vent
Not behind
a curtain
Not behind
a closet

Alecto COA3910 Specifications

General

Brand	Alecto
Model	COA3910
Category	Carbon Monoxide Alarm
Language	English