Need help?Do you have a question about the Aleko LM106 and is the answer not in the manual?
Details the function of each pin in the 8-pin socket for connecting the keypad.
Instructions on how to enter the programming mode using specific key presses.
Steps to modify the default program password for security.
Procedure for adding multiple cards automatically with sequential numbering.
Method to add cards using predefined card numbers for multi-card operations.
Instructions for removing single or multiple cards from the system.
Guide on how to switch between different access control modes.
Procedure to set the duration the door remains unlocked after access.
Steps to modify the password used for granting access.
How to exit the programming mode and return to normal operation.
Procedure to change the password associated with a specific card.
Instructions for restoring system parameters to their original factory settings.
Demonstrates changing the program password from default to a new one.
Shows how to add multiple new cards sequentially.
Illustrates adding two cards with predefined numbers.
Demonstrates deleting cards by their specific numbers.
Example of switching the access control mode to 'Card Only'.
To Next Page
General