Alesis Core1 User Manual

6
Windows 7:
1. Use the included USB cable to connect the Core 1 to your computer.
2. Go to Start Menu > Control Panel > Hardware and Sound > Sound.
3. Click the Playback tab and select Core 1 as the default device.
4. Click the Recording tab and select Core 1 as the default device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-channel, 24-bit, 48000 Hz (Studio
Quality) as the default format.
7. Uncheck both boxes under Exclusive Mode.
8. Click OK to close the Properties window.
9. Click OK to close the Sound control panel.
Mac OS X:
1. Use the included USB cable to connect the Core 1 to your computer. Then go to
Applications > Utilities > Audio MIDI Setup.
2. In the Audio Devices window, select Core 1 in the left column.
3. Right-click Core 1, and select Use this device for sound input.
4. Right-click Core 1, and select Use this device for sound output.
5. Quit Audio MIDI Setup.

Alesis Core1 Specifications

General

Brand	Alesis
Model	Core1
Category	Accessories
Language	English