Alesis Fusion Reference Manual

Chapter 3: Fusion Modes
3
99
Mix Mode
This section covers parameters relating specifically to Mix mode. This
includes everything found on the “Mix,” “Part,” and “Utility” tabs (to the
left of the display). See chapter 4 for detailed descriptions of the “Arp,”
and “Effects” tabs.
Mix mode is a multitimbral mode that allows you to load up to 16
programs in order to create splits, layer sounds, and set up programs on
separate channels for use with an external sequencer. Each program in a
mix is stored under its own “part” and the active parts are listed on the
upper right corner of the screen. The active part number is highlighted
whenever that part is being triggered using the keyboard or an external
sequencer.

Alesis Fusion Specifications

General

Type	Workstation
Polyphony	64 voices
Synthesis Types	Sample Playback, Virtual Analog, FM, Physical Modeling
Display	240 x 128 pixel LCD
MIDI	In, Out, Thru
RAM	64MB (expandable to 192MB)
Weight (61-key)	28 lbs
Keyboard	61 or 88 keys
Keyboard Type	Semi-weighted (61-key), Hammer action (88-key)
Effects	Reverb, Chorus, Delay, Flanger, Phaser, Distortion, EQ
Storage	40GB internal hard drive
Sampling	Yes
Inputs	2 x 1/4" inputs, 1 x XLR
Outputs	4 x 1/4" outputs, 1 x Headphone