Need help?Do you have a question about the ALEXAPURE Home and is the answer not in the manual?
Take system and components out of the box. Inspect system and connection fittings carefully. Contact distributor if damaged.
Operating pressure 10-125 psi. Feed water temp 40-100°F (cold water only). Avoid hot/cold weather and direct sunlight.
Check for leaks every 2 hours after service and the following day. Turn off water supply when unit is unattended over 72 hours.
Push tubing into fitting until secure. No inserts, sleeve, or knots needed. No Teflon tape required.
Slide nut, sleeve, and insert onto tubing. Insert tubing into fitting. Tighten nut with wrench. No Teflon tape required.
General| Brand | ALEXAPURE |
|---|---|
| Model | Home |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
