Operating Manual
PUMP WITH DRIVE UNIT
PUMP PEDESTAL MOUNTED
2.0 Unpacking, Handling and Storage
2.3 Handling
Refer to the pump weights guide, prior to using
any lifting gear. Use the correct lifting straps
for the pump weight (or pump and drive if
applicable). (See below).
To avoid any problems, on receipt of your pump
always use the following procedure:-
2.1 Documents
1. Check the delivery note against the goods
received.
2. Check if the pump has been delivered
with an electric motor that the motor
instructions are available.
2.2 Unpacking
Care must be taken when unpacking the pump,
and the following stages must be completed:-
1. Inspect the packing for any possible signs
of damage in transit.
2. Carefully remove the packing away from
the pump.
3. Inspect the pump for any visible signs of
damage.
4. Clean away the packing from the pump
port connections.
5. Ensure that any additional equipment such
as seal flushing pipework is not damaged.
4
To Next Page
Loading...
Need help?
General
