Need help?Do you have a question about the Alfa Romeo 156 Sound System and is the answer not in the manual?
General| Brand | Alfa Romeo |
|---|---|
| Model | 156 Sound System |
| Category | Car Receiver |
| Language | English |
Guidance on safe radio usage while driving, emphasizing volume control and awareness of surroundings.
Explains factors affecting radio signal quality, such as terrain and buildings.
Instructions for cleaning the sound system and advice on maintenance.
Advice for optimal tape playback, including tape quality, storage, and cleaning.
Details the four-digit secret code, its location on the code card, and safe storage.
Describes the function of the antitheft LED, which flashes when the system is off.
Instructions for turning the sound system on and its automatic turn-off feature.
How to control the illumination of the keypad and tape compartment.
Procedure for selecting radio functions and frequency bands (FM, MW, LW).
Steps to select Tape or Compact Disc playback modes.
Details how playback pauses when switching functions and resumes upon return.
Explains how to adjust volume using dedicated buttons and the display feedback.
Adjusts bass and treble levels for the sound system.
Adjusts sound balance between left and right speakers.
Adjusts sound balance between front and rear speakers.
Resets all audio settings (bass, treble, balance, fader) to central position.
Enhances bass and treble at low volumes.
Procedure for selecting radio mode and specific frequency bands.
Explains automatic and manual tuning modes for station search.
Details manual and automatic storage of radio stations.
How to recall, listen to, and preview stored radio stations.
Adjusts FM station volume level relative to tape player volume.
Enables Radio Data System and Traffic Information broadcasts.
Automatic search for the strongest signal for the same station.
Sets TI volume and enables emergency announcement reception.
Prioritizes and tunes to specific program types.
Enhances traffic info and selects PTY types within EON mode.
Enables regional tuning and indicates stereophonic reception.
Explains the autoreverse function and how the display indicates the tape side.
Describes automatic equalization based on tape type (CrO2, METAL).
Instructions for using fast forward and rewind buttons for tape playback.
Details how to search for previous or next tracks on a tape.
Repeats the last played track, indicated by 'RPT' on display.
Plays each tape track for 10 seconds, indicated by 'SCAN'.
Automatically skips blank tape sections longer than 15 seconds.
Limits noise produced by tapes using Dolby B noise reduction.
Procedure for ejecting a tape from the player.
Provides technical specifications for the sound system, including max power and frequency range.
Information on antenna integration and a warning for car washes.
Details the automatic power aerial control and its switching voltage.
Lists the types and power ratings of speakers included in the sound system.
Specifies the fuse rating for the sound system's protection.
Function allowing radio to stay tuned on FM stations via transmitters with different frequencies.
Function enabling listening to both sides of a tape without manual turning.
Function for automatic storage of radio stations.
Function to adjust sound output between left and right speakers.
Activates fast forward to skip blank tape sections, reducing waiting times.
Refers to a multiple Compact Disc player.
Tape noise limiting device licensed by Dolby Laboratories.
Allows radio to tune to stations broadcasting traffic information.
Function to adjust sound output between front and rear speakers.
To Next Page
