alfabotus@hotmail.com
6
ing.
5.Keep Warm
1 ) When pressing the button "Menu" to choose "Keep Warm", the
light "Keep Warm" will change from flickering to always on.
2) When the light is "Keep Warm" always on, the machine will start to
keep the temperature at about 140F. The LED light will enter a
6-Hours countdown.
The keep-warm function maintains a constant temperature of about
140F , and the maximum working time is 6 hours.
3) When the milk maker emits 10 beeps and the LED light display
panel showing"- -", the machine finishes working.
6.Self Clean
1) When pressing the button "Menu" to choose "Self Clean", the light
"Self Clean"will change from flickering to always on.
2) When the light is "Self Clean" always on, the machine will start to
Stir to rinse the inside.The LED light display panel will enter a 1-minute
countdown.
3 ) When the milk maker emits 10 beeps and the LED light display
panel showing"- -", the machine finishes working. After using this
function, it is easier to clean with the included brush.
7.Delay Start
1) When pressing the "Delay Start" button, the LED panel will show
the1-Hourcountdown. Function "Room Temp" is selected by default.
Please press the"Menu" button to select the corresponding function if
you need to select other functions.
2)After finishing the function setting, press the button "Delay Start"
continuously to select the appointment time. The maximum delay
time can be up to 18 hours. 3)After the setup is complete, wait for 3
seconds. The LED display will enter a countdown for 1-18 Hours you
set. The selected function will automatically operate after the count-
down ends.
4) When the milk maker emits 10 beeps and the LED light display
panel showing"- -", the machine finishes working.
To Next Page