Need help?Do you have a question about the Alfamacchine Minigraf 44 and is the answer not in the manual?
General| Brand | Alfamacchine |
|---|---|
| Model | Minigraf 44 |
| Category | Tools |
| Language | English |
Information about the manufacturer, Alfamacchine, and their experience.
How to contact Alfamacchine for support and spare parts.
Machine compliance with European Community Norms.
Details of the warranty period and conditions for mechanical and pneumatic parts.
Customer responsibilities for machine installation, like building works and air supply.
Explains the organization and purpose of the handbook for users and technicians.
The handbook's aim is to provide information for proper use, safety, and maintenance.
Identifies intended users (operators, technicians) and their limitations.
Instructions on how to keep the handbook in good condition.
Describes the basic operation of the pneumatic frame assembling machine.
Lists the key parts of the Minigraf 44 machine.
Details the movement directions (X AXIS, Y AXIS) of the machine's components.
Refers to table 2.9-A for overall machine dimensions.
Specifies the required environmental conditions for machine installation and operation.
Requirements for premises lighting to ensure visibility and safety.
Information on vibration levels and their potential impact on users.
Details the noise levels produced by the machine during operation.
Provides specific technical specifications and characteristics of the machine.
Lists the accessories and parts included as standard with the machine.
Lists the specific standard accessories provided with the machine.
Explains the modular design allowing for future upgrades.
Lists accessories available for purchase to enhance machine functionality.
Describes how the machine can be customized with additional accessories.
Discusses the machine's compatibility with industrial electromagnetic environments.
Essential safety precautions and warnings for operating the machine.
Defines the intended and designed purpose of the machine.
Lists conditions or uses for which the machine is not suitable.
Identifies the "working area" and other hazardous zones on the machine.
Describes the built-in safety features and protections for users.
Details the different stop mechanisms and categories of the machine.
Provides crucial procedures for safe operation and avoiding risks.
Outlines inherent risks that cannot be fully eliminated during operation.
Refers to safety plates and adhesive signs and their locations.
Instructions for safe shipment, handling, and protection of the machine.
Guidelines for storing the machine properly during periods of inactivity.
Steps needed to prepare the working area for machine installation.
Procedures for unpacking the machine and checking for shipping damage.
Instructions on how to place and level the floor-stand version of the machine.
How to connect the machine's pneumatic system.
Detailed steps for connecting the pneumatic system and foot pedal.
Essential checks and verifications before the first machine startup.
How to set up and prepare the machine for operation.
Step-by-step guide on how to load the V-nails magazine.
Instructions for replacing the V-nail guide head for different nail sizes.
Guides the operator through initial adjustments after installation.
How to adjust the stops for precise V-nail placement.
Instructions for adjusting the position and pressure of the vertical clamp.
Procedure for correctly positioning the horizontal clamp.
How to adjust the fences for different frame angles and shapes.
Steps to adjust the safety shield for proper protection.
How to adjust the working pressure based on moulding hardness.
Final checks before commencing operations.
Requirements and qualifications for machine operators.
Detailed step-by-step operation guide using foot pedal and joystick.
Advice on V-nail types and assembly positions for optimal results.
How to stop the machine during operation.
How to restart the machine after a stop.
Procedures for safely taking the machine out of service for long periods.
Refers to table conditions for maintenance operations.
Steps to safely isolate the machine before maintenance.
General precautions to follow during maintenance and repair.
Instructions and recommendations for cleaning the machine.
Specifies the type of lubricant and frequency for lubricating machine parts.
Details routine maintenance tasks, checks, and lubrication schedules.
Lists maintenance tasks requiring specialized technical assistance.
Safety precautions specific to diagnostic and troubleshooting interventions.
A table listing common problems, their causes, and remedies.
How to contact Alfamacchine for technical support and assistance.
Lists recommended spare parts for machine maintenance and repair.
Instructions on how to order spare parts from Alfamacchine.
Guidelines for disassembling and disposing of the machine at the end of its life.
Refers to attached declarations, such as conformity to Norm 89/392/CEE.
Lists the available technical diagrams (Mechanic, Pneumatic, etc.).
To Next Page