Need help?Do you have a question about the Alfano PRO III EVO and is the answer not in the manual?
General| GPS | Yes |
|---|---|
| Connectivity | USB, Bluetooth |
| Protection Rating | IP67 |
| Power Supply | Rechargeable battery |
| Input Voltage | 5V |
| Operating Temperature | -10°C / +50°C |
| Storage Temperature | -20°C to +60°C |
Details the front view and physical specifications of the PROIII-EVO.
Details the back view and connection ports of the PROIII-EVO.
Describes external modules like GPS2 and GPS4 for PROIII-EVO.
Lists core functionalities and specifications of the PRO III EVO device.
Lists additional functions available when connecting the GPS2 module.
Lists additional functions available when connecting the GPS4 module.
Guides on handlebar mounting, connector, and plug cap installation.
Instructions for using a Torx X20 driver for battery cover installation.
Explains how to check and interpret the battery level on the device.
Discusses recommended battery types and usage precautions.
Instructions for turning the device on and off using buttons.
Details how to adjust backlight brightness and turn it on/off.
Overview of the HOME screen, its buttons, and functions.
Explains the meaning of symbols and the operation of navigation buttons.
Describes shortcuts for accessing session data, backlight, and power off.
How to configure the device's automatic switch-off function.
Settings related to Bluetooth connectivity for GPS2/GPS4 modules.
Introduction to creating and managing courses on the device.
Configuring date and time using GPS satellite data.
Setting up driver profiles for session recording.
Setting up temperature sensors (T1, T2, T3, T4) for data logging.
Setting up RPM measurement based on engine type.
Procedure for setting up gear ratios using LEDs and RPM data.
How to set up and use the 3-axis G-force sensor.
Explains the function and meaning of the device's LED indicators.
Configuring screen contrast, LED brightness, and backlight.
How to set and display peak recorded values for RPM, speed, and temperature.
Checking GPS signal strength and enabling/disabling GPS.
Displaying and managing engine operating times.
Setting the data recording frequency for various measurement types.
Customizing the bar graph size for lap time analysis.
Setting measurement units for speed and temperature.
Choosing the display language for the device interface.
Restoring the device to its original factory settings.
Guide for upgrading the ALFANO device firmware using PC software.
How to select and access recorded courses from a list.
Options for creating, modifying, sending, and receiving course data.
Guide to creating course data, maximum 80 courses.
Explains methods like Magnet Line, Infrared, GPS, and combined.
Setting course name and timing method (Magnet/Infrared).
Configuring number of magnets, start partial, and obscurity settings.
Setting up course name and timing method using GPS.
Procedures for acquiring GPS signal and starting track configuration.
Setting up course name for Magnet/Infrared + GPS timing.
Handling GPS signal loss and configuring partials for combined timing.
Displays best lap times and session summaries.
Instructions for erasing recorded data from the device.
Options for analyzing specific course data, like best laps and theoretical laps.
Compares best lap times across all sessions and the last session.
Derives theoretical lap times from best segment times.
Shows the best lap time highlighted with segment times.
Compares lap times and displays differences from best segment times.
Analyzes engine usage distribution across RPM ranges per lap.
Detailed analysis of RPM, temperature, speed, and gear data with graphs.
Guide to establishing a Bluetooth connection for data transfer.
Instructions for connecting the device to a PC via USB.
Details the display elements for Screen 1 (best time, lap count, temp T1).
Details the display elements for Screen 2 (best time, lap count, temp T1/T2).
Details display elements for Screen 3 (lap time, segments, temp T1/T2).
Details display elements for Screen 4 (best time, lap count, temp T1).
Details display elements for Screen 5 (lap time, lap count, temp T1).
Details display elements for Screen 6 (lap time, lap count, temp T1).
Details display elements for Screen 7 (lap time, segments, temp T1).
Details display elements for Screen 8 (lap time, segments, temp T1).
Details display elements for Screen 9 (lap time, engine time, temp T1).
Details display elements for Screen 10 (lap time, lap count, O2 sensor).
Details display elements for Screen 11 (lap time, segments, temp T1/T2).
Lists available battery types and specifications.
Details available chargers and rechargeable battery packs.
Guide for upgrading the ALFANO device firmware using PC software.
Factors affecting GPS signal reception and quality.
Information on acquiring satellite data for accurate positioning.
Setting device time using GPS date and GMT, and timezone adjustments.
Terms and conditions of the 24-month warranty against manufacturing defects.
Policy on product changes and improvements made by the manufacturer.
Customer's responsibility for product usage, damages, and misuse.
Guidelines for environmentally responsible disposal of the device and accessories.
To Next Page
