40
Accessory: Flow Vision™ SC Software
Flow Vision™
SC is an intuitive software interface to help
your test cycles run smoother and shorten your engineering
time!
Flow Vision™ SC lets you connect to and communicate
with multiple Alicat units simultaneously. Now you can view
virtual displays, control tabs, charts and data lines from every
connected Alicat device on the same screen.
Flow Vision™ SC supports all RS-232 and RS-485 Serial
communication functions, including: gas selection, tareing,
set-point control, valve tuning and fl ow averaging.
Session Saving: Save and reload your confi guration data with confi dence.
Script Building: Create scripts to adjust a controller’s set-point value at variable specifi ed time intervals.
Charting: Chart as many parameters as you want off as many devices as you want, with color coding,
zooming, and printing functionality.
Alarms: Create software alarms that will notify you of given parameter conditions.
Data Capture & Logging: Capture and log data to either a .csv fi le or a .txt fi le. Improved Data Logging
and Data Log File Splitting for easy to manage data.
Flow Vision™ SC supports multiple devices connected to
the same RS-232 or RS-485 port.
Simply connect each device to a BB-9 Multi-Drop Box,
then using device addressability, assign an identifi er to each
instrument. (Note: BB-9 is not compatible with RS-485.)
Now you can easily monitor and control multiple Alicat
instruments from your computer.
Devices
Scripts
Data Logs
Charts
Terminals
To Next Page
Loading...