Alicat M Series - DB15 Pin-Outs

44
DB15 Pin-Out
Note: The above pin-out is correct for units with a DB15 pin-out. If your unit is
marked DB15H or DB15K, you must use the correct pin-out (as shown on the
following page).
Pin Number Function
2 Signal Out
5 Supply
8 Tare (meters)
Set-Point (controllers)
9 Ground
11 Secondary Out
13 RS-232 RX
RS-485 –
15 RS-232 TX
RS-485 +
8
151311
9
2
5
DB15 Pin-Outs
If your Alicat Instrument was ordered with
a DB15 connection, please be sure to
reference the appropriate pin-out diagram.