Align AL-250 - User Manual

ATIGN'
POWER TABLE FEED
OPERATOR'S MANUAL
A[,TGI
h

Summary

INSTALLING THE POWER FEED

INSTALL THE DRIVE UNIT

Steps for installing the power feed drive unit onto the table.

INSTALL THE BEVEL GEAR

INSTALL THE DIAL AND HANDCRANK

INSTALL THE LIMIT-SWITCH

TROUBLESHOOTING POWER FEED ISSUES

NO POWER, NO INDICATOR LIGHT

Checks for power cord, main switch, and circuit breaker status.

POWER FEED DOES NOT WORK, INDICATOR GLOWS

Checks carbon brush, armature, and connector integrity.

MOVEMENT IN ONLY ONE DIRECTION

Diagnoses limit-switch functionality for directional control.

LIMIT-SWITCH FAILS TO STOP TABLE

Checks limit-switch operation against travel stops.

PARTS LIST FOR POWER FEED

PARTS LIST CONTINUED

HOW TO INSTALL CROSS FEED

INSTALLATION INSTRUCTIONS

HOW TO INSTALL T-WAY TRACK FOR KNEE-LIFT FEED

T-WAY TRACK INSTALLATION

HOW TO INSTALL KNEE LIFT FEED

STEP-BY-STEP INSTALLATION

Align AL-250 Specifications