Alisun SunVision V200 XXL

Need help?

Do you have a question about the Alisun SunVision V200 XXL and is the answer not in the manual?

Summary

PROGRAMMING

Programming Step-by-Step Guide

Detailed instructions on how to program the SUNVISION V, covering all functions and settings.

Entering Programming Modes

Steps to access and enter the programming and program modes for device configuration.

Setting Core Functions

Adjusting key operational parameters like tanning time, after-cooling, and operating modes.

Setting Undressing and Body Cooling

Configuring undressing time and body cooling positions for user comfort.

Setting Advanced Functions

Configuring time per pulse and tube on/off facility for tanning sessions.

Finalizing Programming Settings

Setting main cooling wait times and confirming all programmed adjustments.

OPERATION

Control Panel Overview

Description of the touch keys and display elements on the SUNVISION V control panel.

Using the Control Panel

Instructions on operating the control panel, including stop and start key functions.

READING OUT SERVICE DATA

Entering Service and Counter Modes

Steps to access the service mode and navigate into the counter mode for data retrieval.

Function Listing and Value Reading

Overview of available functions and procedures for reading out specific data values.

Resetting Counters

Instructions on how to reset specific operational counters to zero.

Exiting Service Mode

Steps to safely exit the service mode and return the SUNVISION V to its ready state.