Allen-Bradley ControlLogix L7 User Manual

136 Rockwell Automation Publication 1756-UM001M-EN-P - February 2012
Chapter 8 I/O Modules
4. Add the remote communication module you are using.
5. Specify the chassis and connection properties according to your network
configuration.
6. Right-click the backplane of the newly-added communication module and
choose New Module.
7. Select the I/O module you want to add and click OK.
8. Specify the Module Properties according to your module and application.

Allen-Bradley ControlLogix L7 Specifications

General

Brand	Allen-Bradley
Model	ControlLogix L7
Category	Controller
Language	English