Allen-Bradley E300 - Communication Module to Control Module Assembly

30 Rockwell Automation Publication 193-QR004B-EN-P - January 2017
Chapter 3
3. Use the or keys to select the appropriate Operating Mode. See Appendix A for a description of the
available Operating Modes.
4. P
ress
to save the chosen preset configuration values for the chosen Operating Mode or press to cancel
the modification and restore the previous value.
5. P
ress
to return to the navigation menu.
Edit Full Load Amps (Parameter 171)
1. Choose a navigation method and display FLASetting (Parameter 171).
2. Press the key to modify the value.
3. Use the
or keys to select the new value for the digit on the left side of the of the value. Press the SEL
button to advance the cursor one position to the right. Use the up UP or DOWN keys to select the appropriate
digi
t. Continue this process until the final value has be configured.
4. Press
to save the new value or press to cancel the modification and restore the previous value.
5. Press
to return to the navigation menu.