Allen-Bradley E300 - Starter Assembly; 100-C09…-C55 Starter Assembly Installation

34 Rockwell Automation Publication 193-QR004B-EN-P - January 2017
Chapter 4
3. Click Apply to download the new parameter value to the device.
4. A confirmation window appears. Press OK.
Set Motor FLA Using FLASetting (Parameter 171)
Use the following steps to edit the motor FLA setting using the web interface of the E300 relay EtherNet/IP
Communication Module.
1. Select the Overload Setup parameter group that contains the parameter FLASetting (Parameter 171), then click
t
he Edit button.