Allen-Bradley Powermonitor 3000 - Page 135

Publication 1404-UM001D-EN-E - October 2004
Data Logging 7-3
Status Input Cleared
S# Off
(1)
7 Status Input Number(1-2)
kWh Counter Set Wh Set 8 1
kVARh Counter Set Varh Set 8 2
kVAh Counter Set kVAh Set 8 3
Ah Counter Set kAh Set 8 4
All Energy Counters Set All Power Set 8 5
Trend Log Clear Trend Clr 8 6
Min/Max Log Set M/M Clr 8 7
Factory Defaults Restored FactCfg 8 8
Status Input Counter 1 Cleared S1 Clr 8 9
Status Input Counter 2 Cleared S2 Clr 8 10
Reserved for Future Enhancement 11
Single Setpoint Timer Clear Single SP Set 12
All Setpoint Timers Clear All SP Set 13
Power Up Pwr On 9 0
Power Down Pwr Off 10 0
Self-test Error
ST ####
(1)
11 Hexadecimal Status Error Code (See Table 7.2)
Time Set TimeSet 12 0
Device Reconfigured New Cfg 13 0
Setpoint Reconfigured Set Cfg 14 0
NVRAM Set NVRAM Set 15 0
Transient Detected TRN Det 16 M8 only
User Text - 17 M8 only
(1) Number indicates a numeric digit.
Table 7.1 Event Codes
Event Type Name Event Type
Shown by DM
Event Type
Number
Event Command Code
Allen-Bradley HMIs