Allen-Bradley Powermonitor 3000 - Data Messaging Application Considerations

Publication 1404-UM001D-EN-E - October 2004
2-12 Product Description
Table 2.7 Ethernet Optional Communications (Series A catalog numbers ending in
-ENT)
LED LED Color LED State and Communications
Condition
Link Off Ethernet connection is inactive
Steady Green Ethernet connection is active
RX Off Ethernet is idle, no active data present on
port
Flashing Red Active data is present on Ethernet port
TX Off Powermonitor 3000 is not transmitting any
data through the Ethernet port
Flashing Red Powermonitor 3000 is transmitting data
Table 2.8 EtherNet/IP Optional Communications (Series B catalog numbers ending
in -ENT)
LED LED Color LED State and Communications
Condition
LNK Off No valid physical Ethernet connection
Steady Green Valid physical Ethernet connection
ACT Strobing or
Solid Yellow
Powermonitor 3000 transmitting onto
Ethernet
F1 Off Not Used
F2 Off Not Used
NETWORK STATUS Off No power
Flashing Green No established connections
Steady Green Connected; has at least one established
connection
Flashing Red Connection timeout; one or more
connections to this device has timed-out
Steady Red Duplicate IP; the IP address assigned to this
device is already in use
Flashing Green/Red Selftest; this device is performing a
power-up self test
Po
wermonitor 3000
wermonitor 3000
LINK
RX
TX
F1
LNK
ACT
F2
NETWORK
STATUS
Powermonitor 3000