Allen-Bradley Powermonitor 3000 - Page 251

Publication 1404-UM001D-EN-E - October 2004
Powermonitor 3000 Data Tables A-77
241 Setpoint #7 accumulated active time Refer to Table A.18 Setpoint Setup/Read-Back Select and Status
242 Setpoint #8 accumulated active time
243 Setpoint #9 accumulated active time
244 Setpoint #10 accumulated active time
245 Logging interval Refer to Table A.21 Trend Log Configuration/Read-Back Record Select
246 Logging mode
247 Total records logged
248 Trend log param #1
249 Trend log param #2
250 Trend log param #3
251 Trend log param #4
252 Trend log param #5
253 Trend log param #6
254 Trend log param #7
255 Trend log param #8
256 Trend log param #9
257 Trend log param #10
258 Trend log param #11
259 Trend log param #12
260 Trend log param #13
261 Trend log param #14
262 Trend log param #15
263 Trend log param #16
264 Enable/disable Min/max log Refer to Table A.23 Min/Max Log Configuration/Read-Back Select
265 Timestamp of last min/max clear; year
266 Timestamp of last min/max clear;
Month/day
267 Timestamp of last min/max clear;
Hour/min
268 Timestamp of last min/max clear;
Second/hsec
269 Enable/disable save status input
changes to Event log
Refer to Table A.26 Event Log Configuration/Read-Back Record Select
270 Number of events in the event log
271 Write error status File/BT/Inst.No. Refer to Table A.32 Write Error Status
272 Write error status Parameter number
Param
No.
Parameter name Comment
Allen-Bradley HMIs