Publication 1404-UM001D-EN-E - October 2004
Sample Applications C-3
Data Tables
In the SLC 500 data tables, table N111 is the destination table for the
Read message and N211 is the source for the Write message.
Table N211 contains the following values for setting the date and time
in a Powermonitor 3000 with a password of 0 to January 1, 2003 at
12:00 midnight:
The Read Clock from PM3K and Set Clock from SLC bits are used to
initiate the messages, and are reset when the message instruction
either completes successfully or an error occurs. In your application
Allen-Bradley HMIs
To Next Page
Loading...