Publication 1404-UM001D-EN-E - October 2004
C-22 Sample Applications
each. The first value of a block transfer sequence must be duplicated
in both position 0 and 1 of an initialization file.
N10 - Run Mode
Required numbers are 20, 20, 21, 22, 23, 24, 25, and 26.
N20:0
Required numbers are 5121, 6, 3589, 4, 14, 3
N21:0
Required numbers are 5377, 6, 3589, 4, 16, 3
N22:0
Required numbers are 5633, 6, 3589, 4, 18, 3
N23:0
Required numbers are 5889, 6, 3589, 4, 20, 3
N24:0
Required numbers are 6145, 6, 3589, 4, 22, 3
N25:0
Required numbers are 6401, 6, 3589, 4, 17, 3
N26:0
Required numbers are 6657, 6, 3589, 4, 23, 3
To Next Page
Loading...