Publication 1404-UM001D-EN-E - October 2004
C-28 Sample Applications
The user must enter data into the “Default” and “Custom” tags. Refer
to User-Configured Data Table on page 4-53 for the structure and
rules for the User Configured Table Setup data table and its default
settings.
See Table A.59 on page A-69 for parameters which may be included
in the User Configured Table Setup.
Table C.9 ControlLogix Tags Used
Tag Name Type # of
Elems
Description Table #
msgReadOld MESSAGE N/A Read Existing Config N30
msgWriteNew MESSAGE N/A Write New Config. N30
msgGetStatus MESSAGE N/A Write Status N32
Start BOOL 1 Start Operation
Failed BOOL 1 Failure Flag
Success BOOL 1 Success Flag
Oneshot_1 BOOL 1 One shot
Oneshot_2 BOOL 1 One shot
Timer1 TIMER 1 Inter-message Delay
Timer2 TIMER 1 PM3000 Reset Time
Counter1 COUNTER 1 Message Retry
Default INT 26 Default Configuration
Custom INT 26 Custom Configuration
Old INT 26 Previous Config
Download INT 26 New Config to Write
Pwd INT 1 PM3000 Password
Status INT 2 Write Status
Select INT 1 User Selection
To Next Page
Loading...