Publication 1404-UM001D-EN-E - October 2004
4-8 Communications
Configuring the Powermonitor 3000 using RSNetworx for DeviceNet
1. Launch RSNetWorx.
Table 4.4 Optional DeviceNet Communications Configuration Summary
Parameter Description Range Default User
Setting
Node
Address
DeviceNet node
number (MAC ID)
0 to 64 decimal 63
Baud Rate DeviceNet
Communications
Rate
0 = 125 Kbaud
1 = 250 Kbaud
2 = 500 Kbaud
3 = Autobaud
4 =Program Baud
0 = 125 Kbaud
Bus-off
Interrupt
Specifies response
to a CAN bus-off
interrupt
0 = Hold CAN
chip in reset
1 = Reset CAN
chip and continue
0 = Hold in Reset
TIP
DeviceNet is an open-standard, multi-vendor
communications network. Although other vendors
offer DeviceNet configuration tools, all examples in
this manual will depict the use of Rockwell Software
RSNetWorx for DeviceNet.
To Next Page
Loading...