6 Stratix 5100 Wireless Access Point/Workgroup Bridge
Rockwell Automation Publication 1783-PC007D-EN-P - February 2017
Configure the Access Point
The configuration process takes place on the WAP using Stratix 5100 Device Manager software or Command Line
Interface (CLI).
For instructions on how to configure the wireless access point by using Stratix 5100 Device Manager software and CLI,
see the Stratix 5100 Wireless Access Point/Workgroup Bridge User Manual, publication 1783-UM006
.
Specifications
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
You can view or download publications at
http://www.rockwellautomation.com/global/literature-library/overview.page
. To order paper copies of technical
documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.
Category Specification
Dimensions (LxWxD) 22.04 x 22.04 x 4.67 cm (8.68 x 8.68 x 1.84 in.)
Weight 1.22 kg (2.7 lb)
Operating temperatures -20…+55 °C (-4…+131 °F)
Storage temperature -30…+85 °C (-22…+185 °F)
Humidity 10…90% noncondensing
Power rating Input: 48V DC, 380 mA
Antennas External
Resource Description
Stratix 5100 Wireless Access Point/Workgroup Bridge User
Manual, publication 1783-UM006
Describes the installation and configuration of
the Stratix 5100 Wireless Access
Point/Workgroup Bridge.
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Provides general guidelines for installing a
Rockwell Automation industrial system.
Product Certifications website,
http://www.rockwellautomation.com/global/certification/ov
erview.page
Provides declarations of conformity, certificates,
and other certification details.
http://www.cisco.com
Provides reference manuals, for example, the
Configuration Professional Software User Manual
and the IOS CLI Reference Manual.
Industry Canada: 2461B-102080
(RSS-210 - License Exempt Radio Apparatus: Category I Equipment)
To Next Page
Loading...