104 Rockwell Automation Publication 1783-UM010C-EN-P - June 2019
Chapter 9 Updating the Device
5. This step is optional. Perform this step if you want to change the file name.
This step is not recommended.
Click Browse Flash, and the Browse Flash dialog appears with the Local
File System Path populated automatically. If the file name does not appear,
enter it manually in the File Name field, and then click OK.
6. Click Upload Image. ASDM uploads the file.
Table 12 - Upgrade Software Configuration Descriptions
7. The ASDM dialog indicates that the image was uploaded and asks if you
want the image set as the ASDM image. Click Yes.
8. The Information dialog reminds you to save the changes to make them
permanent. Click OK.
Field Description
Image to Upload • ASA - Adaptive Security Appliance
• ASDM - Cisco Device Management software for ASA platform
Local File Path The path to the location of the file on your local personal computer.
Flash File System Path The path to the system designed for the flash device.
To Next Page
Loading...