110 Rockwell Automation Publication 1783-UM010C-EN-P - June 2019
Chapter 9 Updating the Device
Table 14 - System Reload Configuration Fields
c. Click Yes on the Confirm Schedule Reload dialog. The device
turns off.
d. The Reload Status dialog displays the restart process. Click
Exit ASDM.
e. Restart ASDM once the ASA reboots, which takes a few minutes. To
know when the ASA is ready, ping the IP address.
Field Description
Save the running configuration at time of reload Saves the running configuration when the system reloads.
Reload without saving the running configuration Reloads the running configuration without saving it.
Now Restart the device immediately.
Delay Number of hours and minutes from now to reload
the device.
Schedule at The time and date to reload the device.
Reload Message The message to be displayed when the system is about
to restart.
On reload failure, force an immediate reload after Specifies whether the device forces a reload immediately if a
scheduled reload fails. Also, specifies the maximum hold
time, which is the amount of time that the security
appliance waits to notify other subsystems before a
shutdown or restart. A forced shutdown/reboot occurs after
this time elapses.
To Next Page
Loading...