20 Rockwell Automation Publication 1783-UM010C-EN-P - June 2019
Chapter 1 About the Security Appliance
Temperature Sensor
The operating system monitors the CPU temperature when it is running.
• If the CPU temperature is in a critical condition, below -40 °C or above
+105 °C (below -40 °F or above +221 °F) the Alarm Out status
indicator turns red.
• When the CPU temperature returns to a normal condition, the Alarm
Out status indicator turns off.
The critical range of temperature is not configurable. It is hard-coded as below
-40° C or above +105 °C (below -40 °F or above +221 °F).
Software Features
The following software features support the hardware.
• Software based on ASA version 9.12.0 and FirePOWER 6.4.0 supports
the Stratix 5950 security appliance hardware platform.
• The software provides Firewall, Network Address Translation (NAT),
VPN, and intrusion prevention system (IPS) features
• ASDM Bundled Version 7.12.1 (including ASA FirePOWER)
• CSM version 4.11 and FireSIGHT Management Center version 5.4.1.6
• Windows 10 is not supported.
TIP The Stratix 5950 security appliance is a joint technology
collaboration with Cisco. You can leverage the CSM and FireSIGHT
Management Center Cisco software bundles with this device.
To Next Page
Loading...