50 Rockwell Automation Publication 1783-UM010C-EN-P - June 2019
Chapter 3 Configure the Security Appliance
9. Log in to FirePower with:
username: admin
Password: Sourcefire
Passwords are case-sensitive.
10. Run configure password and change the password
11. Set the DNS servers that you obtained from your network
administrator, for example:
configure network dns servers [IP Address],
[IP Address], [IP Address]
12. Run exit
13. Hold Control-Shift-6.
14. Release those keys, then press x.
15. Type stratix5950# exit
TIP To update the ASA, ASDM and FirePOWER software, see Updating ASA
Software on page 107, Updating ASDM Software on page 103, Install the
SFR 6.4.0 Update on page 111, and Reset the Device to Factory Defaults on
page 118.
To Next Page
Loading...