Publication 2092-UM001D-EN-P — July 2005
D-12 Ultra1500 Operator Interface
Pr-0.04 Inertia Ratio
Pr-0.05 Input Signal Assignment - Group 1
Pr-0.06 Input Signal Assignment - Group 2
0x1 Slowest
0x2 Slower
0x3 Slow
0x4 Medium-Slow
0x5 Medium
0x6 Medium-Fast
0x7 Fast
0x8 Faster
0x9 Fastest
Default: 0
Units: –
Range: 0 to 6000
Default: 0
Units: (Load Inertia / Motor Inertia) * 100
Ultraware Link: Inertia Ratio
Range for all digits: 0 to 8
Value Description
0 Input Signal OFF
1 to 7
Input signal assigned to
hardware inputs 1 through 7
8 Input Signal ON
Data Size: 4 digits
Digits: Digit Description Default
0 Drive Enable 0x1
1 Overtravel – Positive 0x8
2 Overtravel – Negative 0x8
3 Integrator Inhibit 0x0
Applicable Operating Mode All
Range for all digits: 0 to 8
Value Description
0 Input Signal OFF
1 to 7
Input signal assigned to
hardware inputs 1 through 7
To Next Page
Loading...