This manual, or a copy of it, must be kept with the machine at all times.
There is a manual storage container located on the machine for your convenience.
Walk-Behind Trowel
OPERATIONS-PARTS MANUAL
This manual covers the Trowels listed below:
Part No. Description
069879 430 EDGER, 5.5HP HONDA, RAPID PITCH (PRE 2025 - 7HP KOHLER)
070340 430 EDGER, 5.5HP HONDA, (OLD) FINE PITCH (PRE 2025 - 7HP KOHLER)
075309 430 EDGER, 5.5HP HONDA, FINE PITCH (PRE 2025 - 7HP KOHLER)
049781 PT, 436 EDGER, 9HP HONDA, LONG ADJ HANDLE (FINE)
063966 PT, 436 EDGER, 9HP HONDA, LONG ADJ HANDLE (RAPID)
049782 PT, 436, 5.5HP HONDA, LONG ADJ HANDLE (FINE)
063967 PT, 436, 5.5HP HONDA, LONG ADJ HANDLE (RAPID)
049783 PT, 436, 9HP HONDA, LONG ADJ HANDLE (FINE)
063968 PT, 436, 9HP HONDA, LONG ADJ HANDLE (RAPID)
076131 PT, 436, 9.5HP KOHLER, FINE PITCH
076132 PT, 436, 9.5HP KOHLER, RAPID PITCH
072820 PT, 436TC, 9HP HONDA, FINE PITCH
072825 PT, 436TC, 9HP HONDA, RAPID PITCH
049785 PT, 446, 9HP HONDA, LONG ADJ HANDLE (FINE)
049790 PT, 446, 9HP HONDA, LONG ADJ HANDLE (RAPID)
076133 PT, 446, 9.5HP KOHLER, FINE PITCH
076134 PT, 446, 9.5HP KOHLER, RAPID PITCH
055904 PT, 446TC, 13HP HONDA, LONG ADJ HANDLE (FINE)
058899 PT, 446TC, 13HP HONDA, LONG ADJ HANDLE (RAPID)
Copyright © 2020 Allen Engineering Corporation
All rights reserved
All information, specifications, and illustrations in this manual are subject to change without notice and are based on the latest
information at the time of publication. No part of this manual may be reproduced or transmitted in any form or by any means,
electronics or mechanical, for any purpose, without the express written permission of Allen Engineering Corporation (AEC). AEC
assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.
Allen Products are covered under one or more of the following patent numbers:
10,100,537; 9,068,301; 9,068,300; 8,360,680; 7,690,864; 7,114,876B1; 6,857,815B2; 6,582,153
With other Patents Pending.
Printed in U.S.A.
064634Page 2
To Next Page
Loading...
