41
SPECIFICATIONS
EID_TS080022 Rev 1.0
Operating frequency
134.2 kHz
Standards
ISO 11784, ISO 11785
Tag compatibility
HDX, FDX-B
Reading distance
[*]
Using charged battery
pack
(w/o AC adapter)
Allflex HDX HP Ø 30mm: 39cm
Allflex FDX-B HP Ø 31mm: 34cm
Allflex HDX LW Ø 26.4mm: 30cm
Allflex FDX-B LW Ø 26.4mm: 32cm
Memory
3200 ID tags in a non volatile memory
User interface
2 x 16 characters backlit readout
Red LED “Exciter active”
Audible beeper and green LED “Good Read”
One “Press to Read” push button
Comm. Interfaces
RS232 Serial Data Port (9600/N/8/1) – 1m coiled cable
Bluetooth
®
(optional)
Comm. data format
Decimal or hexadecimal in ASCII format
Features
Retagging counter and user code management
Software upgradeable via RS232 Serial Port
Battery pack
Internal removable rechargeable 9.6V NiMH battery pack
Power supply
Input: 100-240VAC – 50/60Hz
Output: 12VDC – 1.5A
Temperature range
-10°C to +55°C
Material
Yellow fiberglass tube enclosure and black ABS plastic
Dimensions
L x D: 600 x 32mm or 450 x 32mm
Weight
(with battery pack)
60cm model: 731g (26 ounces)
45cm model: 665g (23.5 ounces)
Certifications
Ref: SE-49151
Part 15.209, Subpart C (FCC ID: NQY – 930041)
IP67 IEC 60529
Drop Test IEC 60068-2-32
These specifications may vary depending on the technical improvements
*
Measured in a clean environment (no metallic object at less than 2 meters, devices generating radiated emissions are kept away from the reader).
EID tags are placed in best orientation and have a resonance frequency at 134.2kHz.
To Next Page
Loading...
