This appliance shall not be used to dry off solvents or dry
cleaning fluids. Fabric softeners, or similar products, should
be used as specified by the fabric softener instructions.
IMPORTANT: Refer to the INSTALLATION INSTRUC-
TIONS before using dryer.
IMPORTANT: Before using dryer for the first time, use
an all-purpose cleaner or a detergent and water solu-
tion and a damp cloth to remove shipping dust from in-
side of dryer drum.
NOTE: This appliance is designed for repeated normal
operation according to operating instructions.
1. Sort items into separate loads.
NOTE: Remove all objects from pockets such as
lighters and matches.
IMPORTANT: Oil affected items can ignite spontane-
ously, especially when exposed to heat sources
such as in a tumble dryer. The items become warm,
causing an oxidation reaction in the oil. Oxidation
creates heat. If the heat cannot escape, the items
can become hot enough to catch fire. Piling, stack-
ing or storing oil affected items can prevent heat
from escaping and so create a fire hazard.
NOTE: Remove all sharp objects from laundry to
avoid tears and rips to items during normal machine
operation.
2. Clean lint filter (if using lint filter guard, remove first).
1. Lint Filter Guard (optional)
2. Lint Filter
Figure 2
WARNING
To reduce the risk of fire and risk of lint collecting
in exhaust duct, do not operate dryer without lint
filter in place.
W771
NOTE: The Lint Filter Guard is an optional accesso-
ry to help prevent items from falling in the lint filter.
3. Load dryer half full with laundry ( 18 pounds [8.2 kg] maxi-
mum dry clothes load). Add fabric softener sheet, if de-
sired, except with steam cycles.
WARNING
To reduce the risk of fire, explosion, serious in-
jury or death, clothes which have traces of any
flammable substances such as cooking oil, ma-
chine oil, flammable chemicals, thinner, etc. must
not be put into the dryer.
W131
NOTE: To avoid damage to dryer, do not use more
than one fabric softener sheet per load.
4. Close loading door. Dryer will not operate with the door
open.
5. Select the desired cycle setting under Cycle Selection.
These settings control the drying time.
The ENERGY SAVER settings, marked with an asterisk (*),
show which dryer settings will use the least energy.
6. Select Fabric Selector based on load type. Follow garment
manufacturer's care labels for recommended temperature
settings.
7. Select the dryness level under Auto-Dryness.
8. Push start button to start dryer.
NOTE: To stop dryer at any time, open the door or
press the Start/Pause button. To restart dryer, close
door and press the Start/Pause button again.
Operating Your Dryer
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
12 Part No. D518519ENR2
To Next Page
Loading...
