EasyManua.ls Logo

Alliance Laundry Systems DR5004WE - Drying Performance Issues; Warranty Repairs

Alliance Laundry Systems DR5004WE
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dryer Symptom Possible Cause/Solution
Dryer doesn’t dry clothes satisfactorily Check exhaust duct to outside to see if it is kinked, blocked or
needs cleaning.
Check weather hood to make sure flapper moves freely, has not
been pushed in or has not been blocked.
Auto-Sensing cycle – Adjust Dryness selection.
Time Dry cycle - Allow more or less time.
Clean the lint filter.
Make sure the load isn’t too small. Small loads may not tumble
properly or dry evenly.
The Auto-Sensing cycles are not suggested to be used for small
loads such as two small towels. For those loads, use the Time
Dry cycle.
Check load being dried. Heavy items dried with lightweight items
will not dry as quickly as the rest of the load.
Refer to Sort section for proper sorting information.
Dryer is noisy Check dryer for foreign objects (nails, coins, bobby pins, metal,
plastic toys, etc.). Remove items from dryer.
Make sure dryer is level. Uneven leveling can cause vibration.
Normal operating sounds include the tick of timer advancing, heat
source going on and off, and humming of air moving through the
dryer and exhaust system.
Normal operating sounds include the heat source going on and off
and the humming of air moving through the dryer and exhaust sys-
tem.
Clothes are too wrinkled Check heat setting. Overdrying can cause wrinkling.
Check load size. Large loads may not tumble properly and may
cause wrinkling.
Clothes have odor Check room for odors before drying clothes. Any odor (fried foods,
paint, varnish, cleaners, burning wood, etc.) will transfer to clothing
as the dryer draws air from the room.
Ventilate room before drying clothes.
Cycle advances too slowly When in an Auto-Sensing cycle, the time it takes depends on the
type and size of the load being dried. When clothing has more
moisture, the cycle takes longer than when the clothes are more
dry.
Warranty Repairs
If something should occur with your washer or dryer that re-
quires service please use the service locator at www.speed-
queen.com.
If something should occur with your washer or dryer that re-
quires service please use the service locator at
ca.huebsch.com.
We would like to point out items that would not be considered
a product failure and are not covered under warranty. If a serv-
ice technician is called for the items listed below you will be re-
sponsible for payment of the service call.
Plugged or restricted venting
Kinked venting
Cleaning lint from within the dryer
Home electrical issues
Home gas issues
Foreign objects found inside the dryer
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
17 Part No. D518519ENR2

Related product manuals