801683 135
Section 6 Adjustments
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
• Motor not grounded! Disconnect electric power before servicing motor.
W485
WARNING
f. Clean residue from coin rail with an alcohol
moistened cloth. Refer to Figure 71.
g. Clean light sensors with a soft brush or air spray
duster. Refer to Figure 72.
h. Close cover for coin drop.
i. Move spring back over cover catch.
j. Reinstall coin drop into machine. Refer to
Paragraph 40.
k. Reconnect electrical power to machine and
drop.
l. Add a coin to drop to verify that coin drop is
operating properly and that electrical
connection is working properly.
DRY2091N
Figure 71
DRY2092N
Figure 72
DRY2091N
To Next Page
Loading...
