Special Features
Collecting Audit Information
The control will store audit information in its memory that can be
retrieved by pressing various combinations of keypads. The con-
trol will record total machine cycles, total hours run and total rap-
id advance cycles.
For more information on the audit features, refer to Manual Read
Audit Mode Menu.
Testing the Machine Using Diagnostic
Functions
Special diagnostic features built into the control allow the owner
to run specific diagnostic tests. By opening and closing the serv-
ice door and then pressing various sequences of keypads, the
owner may perform diagnostic tests.
For detailed information on running diagnostic tests, refer to
Manual Diagnostic Mode Menu.
Rapid Advance Feature
This feature allows the owner to manually advance through ac-
tive cycles. This feature is useful when tests must be performed
immediately on a machine currently in an active cycle. In this
case, the owner can manually advance through the cycles to Start
Mode. At this point, the owner can perform the required tests and
then return the machine to the point it was interrupted.
For information on using the Rapid Advance feature, refer to Run
Mode.
Special Features
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
25 Part No. 70579901ENR9
To Next Page
Loading...
