Entering the Manual Mode
Manual Mode allows audit and diagnostic control functions to be
accessed manually from the control.
How to Enter the Manual Mode
1. Open the service door. Refer to Opening the Service Door.
2. Press and hold the SELECT (∧) and DISPLAY (∨) keypads at
the same time.
3.
The display will shows rA Pd.
4. Press the SELECT (∧) or the DISPLAY (∨) keypad to scroll
through the options until the desired option appears in the dis-
play. Refer to Table 1 .
5. Press the START (enter) keypad to enter the option.
Manual Modes
Display Description
rA Pd
Manual Rapid Advance Mode (Refer to Manual Rapid Advance
Menu)
AU dt
Manual Read Audit Mode (Refer to Manual Read Audit Mode
Menu)
di Ag
Manual Diagnostic Mode (Refer to Manual Diagnostic Mode
Menu)
Table 1
How to Exit Manual Mode
Simultaneously press the SELECT (∧) and DISPLAY (∨) key-
pads until the control returns to the mode that was active before
Manual Mode was entered.
Entering the Manual Mode
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
30 Part No. 70579901ENR9
To Next Page
Loading...
