© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT11-06-150R8
101
UniLinc PDA Application (continued)
Editing Machine Cycles (Globals) (Tumble Dryer Only)
1. To edit the global settings, from the Program Options menu, press Edit Machine Cycle. Select
Globals. Press Edit. The Language screen appears.
2. The global settings, which can be modified by first selecting the desired tab from the bottom of
the screen, include the following:
Language: English, Spanish, Italian, French, Dutch and Portuguese
Daylight Savings: On or Off
Misc.: Diagnostic tests, manual programming, rapid advance, display limit errors, auto-
ignite retry attempts (0-255), number of cycles between clean lint screen reminders (0-255)
Advanced: Multi segment cycles, advanced moisture dry, display moisture errors, reversing
rotate time, reversing stop time, advanced reversing
Signals: Turn keypad audio on or off, adjust end of cycle audio volume level and time, turn
external signal audio on or off and adjust the time
Temp.: High (160-190° F), Medium (145-165° F), Low (125-155° F), Very Low (100-120°
F), select temperature measurement (Fahrenheit or Celsius), Cooldown temp (70-110° F),
cooldown time (1-15 min)
Banners: Enter banner text.
3. Press Close.
Downloading to Machine
1. To download edited cycles from the PDA to the machine, from the Program Options menu, press
Download to Machine. The Communications screen appears.
2. If downloading a single cycle, select the cycle number.
3. Aim the PDA at the “Infrared Comm Port” window on the machine’s control press OK.
To Next Page
Loading...
