Alliance Laundry Systems UniLinc - Enabling;Disabling Manual Programming; Resetting to Factory Defaults

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
104
11-06-150R8
UniLinc PDA Application (Continued)
Enabling/Disabling Manual Programming
1. From the Maintenance Options menu, press Enable/Disable Manual Prog. A window appears.
2. Press Yes to enable manual programming or No to disable manual programming. The
Communications screen appears.
3. Aim the PDA at the “Infrared Comm Port” window on the machine’s control. Press OK.
Resetting to Factory Defaults
1. From the Maintenance Options menu, press Reset to Factory Defaults. The Factory Defaults
screen appears. Select which product to reset.
2. Washer-Extractor Only: press the desired option to restore to factory default. A window appears,
for washer-extractor and tumble dryers.
3. Press Yes. The Communications screen appears.
4. Aim the PDA at the “Infrared Comm Port” window on the machine’s control. Press OK.